Waverly, Nebraska

Custom Home Builder
In Waverly, NE

Custom homes in Waverly, designed and built by one team from our office in east Lincoln.

What Building
In Waverly Takes

Waverly runs its own building and zoning office, so a home there follows Waverly’s own process. We handle that side for you.

Waverly or the county, confirmed firstWaverly zones the land inside its limits and one mile beyond. Past that, Lincoln or the Lancaster County Board governs, so we check your parcel first.
Plans and stakeout approvedThe city approves the plans and the stakeout of the house on the lot before it issues a permit.
Energy compliance with the plansA new home’s plans go in with a ResCheck energy certificate, which we prepare with the drawings.
Permit filed onlineBuilding, mechanical, and plumbing permits go through the city’s online portal. Fees are based on the estimated project cost, and new homes carry a building deposit.
Design and permit setFloor plans, elevations, and construction documents, submitted and carried through review by the people who drew them.
ConstructionOur crew and trades build what we drew, with one person accountable on site and a budget you can read.

$225 to $300+
Per square foot, by finish level: #71724-25
Nebraska contractor license: 2021
Drawing and building since

Our work

Drawn by us, and where we could, built by us too.

See all our work

Questions

Before You Book

Something else on your mind? Ask us directly.

Yes. Waverly is in Lancaster County, where we design and build from our office at 285 S 68th Street Place in Lincoln.

The City of Waverly’s Building and Zoning department, at 14130 Lancashire Street. New construction, additions, garages, and accessory buildings all need a permit from the city.

Approved plans and an approved stakeout, plus a ResCheck energy certificate with the plans. Permit fees are based on the estimated project cost, and the city requires a building deposit for new homes.

We plan homes at $225 per square foot for basic finishes, $250 for mid-tier, and $300 and up for top-tier. Land is separate, and so is site work such as a driveway, well, septic system, or power brought to the house.

For most homes, no. Nebraska lets a single-family home under 10,000 square feet be designed without a licensed architect, so a design-build team like ours can design and build it.

Send us the address or the lot you are looking at. We confirm which office covers it, then talk through the home you want and what your budget supports.

How we work

Our Process

Four steps, one team. You meet the people who draw your home and the people who build it on day one.

Step 1: Discovery & Site Visit
We start on your lot or in your house. We walk it with you, talk through how you live, what the budget looks like, and what the zoning allows, so the first sketch is grounded in the real site.
Step 2: Design & Permits
Our designers draw the home, from concept plans to construction documents, and we carry the permit set through the city ourselves. You see every revision before it moves forward.
Step 3: Pricing & Pre-Construction
With the drawings set, we price the build line by line, lock the schedule, and walk you through selections. Because we design and build, the people who drew the plans price them, and you see every invoice once work starts.
Step 4: Build & Handover
Our crew builds what we drew. You get one point of contact, regular walkthroughs, and a clean handover with the documents, warranties, and a home that matches the plans.